Products

Use: general-purpose bench-type grinders

C131 T-Clamp Contact Wheels provide an inexpensive method of grinding a variety of materials using coated abrasives.

Worn abrasive can be replaced with ease. The abrasive strip may be cut from a 1-1/2" wide utility roll. The length of the strip should be 19-5/8" with a notch cut at both ends. The strip is then held securely in place with the adjustable T-clamp.

Reducing bushings: 1/2" ID, 5/8" ID, 3/4" ID 6" diameter x 1-1/2" wide x 7/8" bore May be recovered